Top Tips To Quantify The Cost Of WAN Optimization


Editor’s Note: As we mentioned in a recent article, there’s often some confusion when it comes to how WAN optimization fits into the overall network optimization industry — especially when compared to Internet optimization. Although similar, the two techniques require different approaches to optimization. What follows are some simple questions to ask your vendor before you purchase a WAN optimization appliance. For the record, the NetEqualizer is primarily used for Internet optimization.

When presenting a WAN optimization ROI argument, your vendor rep will clearly make a compelling case for savings.  The ROI case will be made by amortizing the cost of equipment against your contracted rate from your provider. You can and should trust these basic raw numbers. However, there is more to evaluating a WAN optimization (packet shaping) appliance than comparing equipment cost against bandwidth savings. Here are a few things to keep in mind:

  1. The amortization schedule should also make reasonable assumptions about future costs for T1, DS3, and OC3 links. Most contracted rates have been dropping in many metro areas and it is reasonable to assume that bandwidth costs will perhaps be 50-percent less two to three years out.
  2. If you do increase bandwidth, the licensing costs for the traffic shaping equipment can increase substantially. You may also find yourself in a situation where you need to do a forklift upgrade as you outrun your current hardware.
  3. Recurring licensing costs are often mandatory to keep your equipment current. Without upgrading your license, your deep packet inspection (layer 7 shaping filters) will become obsolete.
  4. Ongoing labor costs to tune and re-tune your WAN optimization appliance can often costs thousands per week.
  5. The good news is that optimization companies will normally allow you to try an appliance before you buy. Make sure you take the time to manage the equipment with your own internal techs or IT consultant to get an idea of how it will fit into your network.  The honeymoon with new equipment (supported by a well trained pre-sales team) can be short lived. After the free pre-sale support has expired, you will be on your own.

There are certainly times when WAN optimization makes sense, yet it many cases, what appears to be a no-brainer decision at first will begin to be called into question as costs mount down the line. Hopefully these five contributing factors will paint a clearer picture of what to expect.

Created by APconnections, the NetEqualizer is a plug-and-play bandwidth control and WAN/Internet optimization appliance that is flexible and scalable. When the network is congested, NetEqualizer’s unique “behavior shaping” technology dynamically and automatically gives priority to latency sensitive applications, such as VoIP and email. Click here for a full price list.

Optimizing Your WAN Is Not The Same As Optimizing Your Internet Link — Here’s Why…


WAN optimization is a catch-all phrase for making a network more efficient. However, few products distinguish between optimizing a WAN link and optimizing an Internet link. Yet, the methods used for the latter do not necessarily overlap with WAN optimization. In this article, we’ll break down the differences and similarities between the two practices and explain why WAN optimization tends to be the more common, yet not necessarily most effective, of the two techniques when it comes to overall network optimization.

Some Basic Definitions

A WAN link is always a point-to-point link where an institution/business controls both ends of the link. However, a WAN link does not provide Internet access.

On the other hand, an Internet link is one where one end terminates in a business/home/institution and the other end terminates in the Internet cloud, thus providing the former with Internet access.

A VPN link is a special case of a WAN link where the link traverses across the public Internet to get to another location within an organization.  This is not an Internet link by our definition mentioned above.

Whether dealing with a small business, a home user, or public entities such as libraries, schools etc., there are far more Internet links out there than WAN links. Each of these entities will most certainly have a dedicated Internet link while many will not have a WAN link.

Some Common Questions

If Internet links far outnumber WAN links, why are there so many commercial products dedicated to optimizing WAN links and so few specifically dedicated to Internet optimization?

There are a few reasons for this:

  1. WAN optimization is fairly easy to measure and quantify, so a WAN optimization vendor can easily demonstrate their value by showing before and after results.
  2. Many WAN-based applications — Citrix, SQL queries, etc. — are inherently inefficient and in need of optimization.
  3. The market is flooded with vendors and analysts (such as Gartner) which all tend  to promote and sustain the WAN optimization market.
  4. WAN optimization tools also double as reporting and monitoring tools, which administrators gravitate toward.
  5. A large number of commercial Internet connection are located at Small or medium sized business and and the ROI on an optimization device for their Internet Link is either not that compelling or not understood.

Why is a WAN optimizing tool not the best tool to optimize an Internet link? Don’t the methodologies overlap?

Most of the methods used by a WAN optimizing appliance make use of two principles:

  1. The organization owns both ends of the link and will use two optimizing devices — one at each end. For example, compression techniques require that you own both ends of the link. As mentioned earlier, you cannot control both ends of an Internet link.
  2. The types of traffic running over a WAN Link are consistent and well defined. Organizations tend to do the same thing over and over again on their internal link. Yet, on an Internet link, the traffic varies from minute to minute and cannot be easily quantified.

So, how does one optimize unbounded traffic coming into an Internet link?

You need an appliance such as a NetEqualizer that dynamically manages over all flows for more information you can read. But,  don’t take it from us, you can also check in on what existing NetEqualizer users are saying.

How does a company quantify the cost of using a device to optimize their Internet link?

Admittedly, the results may be a bit subjective. The good news is that optimization companies will normally allow you to try an appliance before you buy. On the other hand, most Internet providers will require you to purchase a fixed length contract.

The fact of the matter is that an Internet link can be rendered useless by  a small number of users during peak times. If you blindly upgrade your contract to accommodate this problem, it is akin to buying gourmet lunches for some employees while feeding everybody else microwave popcorn. In the end, the majority will be unhappy.

While the appropriate network optimization technique will vary from situation to situaiton, Internet optimization appliances tend to work well under most circumstances and are worth implementing. Or, at the very least, they’re worth exploring before signing on to a long-term bandwidth increase with your ISP.

See: Related Discussion on Internet Congestion and predictability.

The True Price of Bandwidth Monitoring


By Art Reisman

Art Reisman CTO www.netequalizer.com

For most IT administrators, bandwidth monitoring of some sort is an essential part of keeping track of, as well as justifying, network expenses. Without visibility into a network load, an administrator’s job would degrade into a quagmire of random guesswork. Or would it?

The traditional way of  looking at monitoring your Internet has two parts: the fixed cost of the monitoring tool used to identify traffic, and the labor associated with devising a remedy. In an ironic inverse correlation, we assert that costs increase with the complexity of the monitoring tool. Obviously, the more detailed the reporting tool, the more expensive its initial price tag. The kicker comes with part two. The more expensive the tool, the more  detail  it will provide, and the more time an administrator is likely to spend adjusting and mucking, looking for optimal performance.

But, is it a fair to assume higher labor costs with  more advanced monitoring and information?

Well, obviously it would not make sense to pay more for an advanced tool if there was no intention of doing anything with the detailed information it provides. Why have the reporting tool in the first place if the only output was to stare at reports and do nothing? Typically, the more information an admin has about a network, the more inclined he might be to spend time making adjustments.

On a similar note, an oversight often made with labor costs is the belief  that when  the work needed to adjust the network comes to fruition, the associated adjustments can remain statically in place. However, in reality, network traffic changes constantly, and thus the tuning so meticulously performed on Monday may be obsolete by Friday.

Does this mean that the overall productivity of using a bandwidth tool is a loss? Not at all. Bandwidth monitoring and network mucking can certainly result in a cost-effective solution. But, where is the tipping point? When does a monitoring solution create more costs than it saves?

A review of recent history reveals that technologies with a path similar to bandwidth monitoring have become commodities and shunned the overhead of most human intervention.  For example, computer operators disappeared off the face of the earth with the invention of cheaper computing in the late 1980’s.  The function of a computer operator did not disappear completely, it just got automated and rolled into the computer itself. The point is, anytime the cost of a resource is falling, the attention and costs used to manage it should be revisited.

An effective compromise with many of our customers is that they are stepping down from expensive complex reporting tools to a simpler approach. Instead of trying to determine every type of traffic on a network by type, time of day, etc., an admin can spot trouble by simply checking overall usage numbers once a week or so. With a basic bandwidth control solution in place (such as a NetEqualizer), the acute problems of a network locking up will go away, leaving what we would call only “chronic” problems, which may need to be addressed eventually, but do not require immediate action.

For example, with a simple reporting tool you can plot network usage by user.  Such a report, although limited in detail, will often reveal a very distinct bell curve of usage behavior. Most users will be near the mean, and then there are perhaps one or two percent of users that will be well above the mean. You don’t need a fancy tool to see what they are doing; abuse becomes obvious just looking at the usage (a simple report).

However, there is also the personal control factor, which often does not follow clear lines of ROI (return on investment).

What we have experienced when proposing a more hands-off model to network management is that a customer’s comfort depends on their bias for needing to know, which is an unquantifiable personal preference. Even in a world where bandwidth is free, it is still human nature to want to know specifically what bandwidth is being used for, with detailed information regarding the type of traffic. There is nothing wrong with this desire, but we wonder how strong it might be if the savings obtained from using simpler monitoring tools were converted into a trip to Hawaii.

In our next article, we’ll put some real world numbers to the test for actual break downs, so stay tuned. In the mean time, here are some other articles on bandwidth monitoring that we recommend. And, don’t forget to take our poll.

List of monitoring tools compiled by Stanford

Planetmy
Linux Tips
How to set up a monitor for free

Created by APconnections, the NetEqualizer is a plug-and-play bandwidth control and WAN/Internet optimization appliance that is flexible and scalable. When the network is congested, NetEqualizer’s unique “behavior shaping” technology dynamically and automatically gives priority to latency sensitive applications, such as VoIP and email. Click here for a full price list.

APconnections Announces NetEqualizer Lifetime Buyer Protection Policy


This week, we announced the launch of the NetEqualizer Lifetime Buyer Protection Policy. In the event of an un-repairable failure of a NetEqualizer unit at any time, or in the event that it is time to retire a unit, customers will have the option to purchase a replacement unit and apply a 50-percent credit of their original unit purchase price, toward the new unit.  For current pricing see register for our price list.  This includes units that are more than three years old (the expected useful life for hardware) and in service at the time of failure.

For example, if you purchased a unit in 2003 for $4000 and were looking to replace it or upgrade with a newer model, APconnections would kick in a $2000 credit toward the replacement purchase.

The Policy will be in addition to the existing optional yearly NetEqualizer Hardware Warranty (NHW), which offers customers cost-free repairs or replacement of any malfunctioning unit while NHW is in effect (read details on NHW).

Our decision to implement the policy was a matter of customer peace-of-mind rather than necessity. While the failure rate of any NetEqualizer unit is ultimately very low, we want customers to know that we stand behind our products – even if it’s several years down the line.

To qualify,

  • users must be the original owner of the NetEqualizer unit,
  • the customer must have maintained a support contract that has been current within last 18 months , lapses of support longer than 18 months will void our replacement policy
  • the unit must have been in use on your network at the time of failure.

Shipping is not included in the discounted price. Purchasers of the one-year NetEqualizer hardware warranty (NHW) will still qualify for full replacement at no charge while under hardware warranty.  Contact us for more details by emailing sales@apconnections.net, or calling 303.997.1300 x103 (International), or 1.888.287.2492 (US Toll Free).

Note: This Policy does not apply to the NetEqualizer Lite.

Deep Packet Inspection Abuse In Iran Raises Questions About DPI Worldwide


Over the past few years, we at APconnections have made our feelings about Deep Packet Inspection clear, completely abandoning the practice in our NetEqualizer technology more than two years ago. While there may be times that DPI is necessary and appropriate, its use in many cases can threaten user privacy and the open nature of the Internet. And, in extreme cases, DPI can even be used to threaten freedom of speech and expression. As we mentioned in a previous article, this is currently taking place in Iran.

Although these extreme invasions of privacy are most likely not occurring in the United States, their existence in Iran is bringing increasing attention to the slippery slope that is Deep Packet Inspection. A July 10 Huffington Post article reads:

“Before DPI becomes more widely deployed around the world and at home, the U.S. government ought to establish legitimate criteria for authorizing the use such control and surveillance technologies. The harm to privacy and the power to control the Internet are so disturbing that the threshold for using DPI must be very high.The use of DPI for commercial purposes would need to meet this high bar. But it is not clear that there is any commercial purpose that outweighs the potential harm to consumers and democracy.”

This potential harm to the privacy and rights of consumers was a major factor behind our decision to discontinue the use of DPI in any of our technology and invest in alternative means for network optimization. We hope that the ongoing controversy will be reason for others to do the same.

What NetEqualizer Users Are Saying (Updated June 2009)


Editor’s Note: As NetEqualizer’s popularity has grown, more and more users have been sharing their experiences on message boards and listservs across the Internet. Just to give you an idea of what they’re saying, here a few of the reviews and discussion excerpts that have been posted online over the past several months…

Wade LeBeau — The Daily Journal Network Operations Manager

NetEqualizer is one of the most cost-effective management units on the market, and we found the unit easy to install—right out of the box. We made three setting changes to match our network using the web (browser) interface, connected the unit, and right away traffic shaping started, about 10minutes total setup time. The unit has two Ethernet ports…one port toward your user network, the other ports toward your broadband connection/server if applicable. A couple of simple clicks and you can see reporting live as it happens. In testing, we ran our unit for 30-days and saw our broadband reports stabilize and our users receiving the same slices of broadband access. With the NetEqualizer, there is no burden of extensive policies to manage….The NetEqualizer is a nice tool to add to any network of any size. Businesses can see how important the Internet is and how hungry users can be for information.

__________________________________________________________________________________________________

DSL Reports, April 2009

The Netequalizer has resulted in dramatically improved service to our customers. Most of the time, our customers are seeing their full bandwidth. The only time they don’t see it now is when they’re downloading big files. And, when they don’t see full performance, its only for the brief period that the AP is approaching saturation. The available bandwidth is re-evaluated every 2 seconds, so the throttling periods are often brief.

Bottom line to this is that we can deliver significantly more data through the same AP. The customers hitting web pages, checking e-mail, etc. virtually always see full bandwidth, and the hogs don’t impact these customers. Even the hogs see better performance (although that wasn’t one of my priorities).

Click here to read more.

NetEqualizer Software Update Improves VLAN Shaping, NTOP


Editor’s Note: The following blog entry explains the newest NetEqualizer features available with our most recent software update. While minor bug fixes are often included in these updates, they will not always be detailed.

We recently released our newest NetEqualizer software update, further improving on our existing technology. The following fixes have been implemented from the the previous 2.43k version to the latest 3.32a.

  1. Upgraded internal disk memory caching. This feature remedied an issue with NTOP that was causing disk corruptions on the CF drive.
  2. Subnet masking was modified such that masked traffic will not count against your license level. Prior to this change, a customer with a 10-meg license who ran 100 meg local transfers across their NetEqualizer would experience a license violation. You can now mask that traffic (make it invisible to the NetEqualizer and hence not violate your license).
  3. A bug fix was put in for customers who run asymmetric pools. Bandwidth pools with different upload and download speeds were not working correctly prior to this fix.
  4. VLAN shaping fix. There was an issue on cold restarts.
  5. Support for multi-core CPU
  6. More efficient connection limit processing

This software update is available without charge for NetEqualizer customers with a current NetEqualizer Software Subscription (NSS). For more information on this update, or the NSS, contact us at admin@apconnections.net.


Do We Need an Internet User Bill of Rights?


The Computers, Freedom and Privacy conference wraps up today in Washington, D.C., with conference participants having paid significant attention to the on-going debates concerning ISPs, Deep Packet Inspection and net neutrality.  Over the past several days, representatives from the various interested parties have made their cases for and against certain measures pertaining to user privacy. As was expected, demands for the protection of user privacy often came into conflict with ISPs’ advertising strategies and their defense of their overall network quality.

At the center of this debate is the issue of transparency and what ISPs are actually telling customers. In many cases, apparent intrusions into user privacy are qualified by what’s stated in the “fine print” of customer contracts. If these contracts notify customers that their Internet activity and personal information may be used for advertising or other purposes, then it can’t really be said that the customer’s privacy has been invaded. But, the question is, how many users actually read their contracts, and furhtermore, how many people actually understand the fine print? It would be interesting to see what percentage of Internet users could define deep packet inspection. Probably not very many.

This situation is reminiscent of many others involving service contracts, but one particular timely example comes to mind — credit cards. Last month, the Senate passed a credit card “bill of rights,” through which consumers would be both better protected and better informed. Of the latter, President Obama stated, “you should not have to worry that when you sign up for a credit card, you’re signing away all your rights. You shouldn’t need a magnifying glass or a law degree to read the fine print that sometimes doesn’t even appear to be written in English.”

Ultimately, the same should be true for any service contracts, but especially if private information is at stake, as is the case with the Internet privacy debate. Therefore, while it’s a step in the right direction to include potential user privacy issues in service contracts, it should not be done only with the intention of preventing potential legal backlash, but rather with the customer’s true understanding of the agreement in mind.

Editor’s Note: APconnections and NetEqualizer have long been a proponent of both transparency and the protection of user privacy, having devoted several years to developing technology that maintains network quality while respecting the privacy of Internet users.

Obama’s Revival of Net Neutrality Revisits An Issue Hardly Forgotten


Last Friday, President Obama reinvigorated (for many people, at least) the debate over net neutrality during a speech from the White House on cybersecurity. The president made it clear that users’ privacy and net neutrality would not be threatened under the guise of cybersecurity measures. President Obama stated:

“Let me also be clear about what we will not do. Our pursuit of cyber-security will not — I repeat, will not include — monitoring private sector networks or Internet traffic. We will preserve and protect the personal privacy and civil liberties that we cherish as Americans. Indeed, I remain firmly committed to net neutrality so we can keep the Internet as it should be — open and free.”

While this is certainly an important issue on the security front, for many ISPs and networks administrators, it didn’t take the president’s comments to put user privacy or net neutrality back in the spotlight.  In may cases, ISPs and network administrators constantly must walk the fine line between net neutrality, user privacy, and ultimately the well being of their own networks, something that can be compromised on a number of fronts (security, bandwidth, economics, etc.).

Therefore, despite the president’s on-going commitment to net neturality, the issue will continue to be debated and remain at the forefront of the minds of ISPs, administrators, and many users. Over the past few years, we at NetEqualizer have been working to provide a compromise for these interested parties, ensuring network quality and neutrality while protecting the privacy of users. It will be interesting to see how this debate plays out, and what it will mean for policy, as the philosophy of network neutrality continues to be challenged — both by individuals and network demands.

Further Reading

APconnections Announces 50-Percent-Off Sale of New NetEqualizer-Lite


Beginning May 26, all customers purchasing a full size NetEqualizer 2000/3000 model will qualify for a 50-percent discount on the NetEqualizer-Lite. In addition, the offer will be extended to all existing NetEqualizer users who will also be entitled to the 50-percent discount on their first NetEqualizer-Lite purchase. This offer is valid until June 30, 2009. Limit two per customer.

As well as offering users the same services available through previously released NetEqualizer models, the NetEqualizer-Lite is Power-over-Ethernet (PoE), handling up to 10 megabits of traffic and 200 users. Furthermore, the NetEqualizer-Lite also serves to solve hidden node issues without customers having to change their existing access points.*

Although the core technology behind the NetEqualizer has not changed, with the latest release price point, many ISPs and businesses are deploying the NetEqualizer-Lite closer to end users, often directly behind congested access points.

After just over a month in the field, NetEqualizer-Lite users are reporting they can now easily increase Internet subscribers by 30 to 50 percent at once congested towers and AP sites. For example, a customer with an 802.11b radio now has 100 subscribers on his network and is still running smoothly. In the past, this customer’s norm for saturation stood at roughly 20 users, but he is now enjoying a 500-percent increase after installing the NetEqualizer-Lite. This is translating into both higher revenues and a more satisfied customer base.

The NetEqualizer-Lite lists at $1499. In addition to the 50-percent discount, we are also currently offering volume discounts. Pricing information on all other NetEqualizer models is available online at http://www.netequalizer.com. For more information, please contact APconnections at 1-800-918-2763 or admin@apconnections.net.

*Hidden nodes are a problem frequently encountered by commercial wireless operators that has previously been solved using APconnections’ AirEqualizer technology. The NetEqualizer-Lite’s capability to offer similar solutions is simply one of the multiple benefits of the technology for administrators of networks of many different types and sizes.

New Asymmetric Shaping Option Augments NetEqualizer-Lite


We currently have a new release in beta testing that allows for equalizing on an asymmetric link. As is the case with all of our equalizing products, this release will allow users to more efficiently utilize their bandwidth, thus optimizing network performance. This will be especially ideal for users of our recently released NetEqualizer-Lite.

Many wireless access points have a limit on the total amount of bandwidth they can transmit in both directions. This is because only one direction can be talking at a time. Unlike wired networks, where a 10-meg link typically means you can have 10 megs UP and 10 megs going the other direction simultaneously, in  a wireless network you can only have 10 megabits total at any one time.  So, if you had 7 megabits coming in, you could only have 3 megabits going out. These limits are a hard saturation point.

In the past, it was necessary to create separate settings for both the up and down stream. With the new NetEqualizer release, you can simply tell the NetEqualizer that you have an asymmetric 10-megabit link, and congestion control will automatically kick in for both streams,  alleviating bottlenecks more efficiently and keeping your network running smoothly.

For more information on APconnections’ equalizing technology, click here.

NetEqualizer-Lite Revolutionizing WISP Performance


After just over a month in the field, NetEqualizer-Lite users are reporting they can now easily increase Internet subscribers by 30 to 50 percent at once congested towers and access point (AP) sites. For example, a customer with an 802.11 B radio now has 100 subscribers on his network and is still running smoothly. In the past, this customer’s norm for saturation stood at roughly 20 users, but he is now enjoying a 500-percent increase after installing the NetEqualizer-Lite. This is translating into both higher revenues and a more satisfied customer base.

Although the core technology behind the NetEqualizer has not changed, with the latest release price point, many users are deploying the NetEqualizer-Lite closer to customers or just behind their congested wireless access points. Customer satisfaction with the new release has been consistent across the board, with users voicing their reviews to us directly as well as online. One user on DSLReports.com commented:

“The Netequalizer has resulted in dramatically improved service to our customers….Bottom line to this is that we can deliver significantly more data through the same AP. The customers hitting web pages, checking e-mail, etc. virtually always see full bandwidth, and the hogs don’t impact these customers. Even the hogs see better performance” (dslreports.com).

In addition to offering users the same services available through previously released NetEqualizer models, the NetEqualizer-Lite is Power-over-Ethernet (PoE), handling up to 10 megabits of traffic and 200 users. Furthermore, the NetEqualizer-Lite also serves to solve hidden node issues without customers having to change their existing APs.*

The NetEqualizer-Lite lists at $1499, but we are currently offering volume discounts. Please contact us for more information at 1-800-918-2763 or admin@apconnections.net.

*Hidden nodes are a problem frequently encountered by commercial wireless operators that has previously been solved using APconnections’ AirEqualizer technology. The NetEqualizer-Lite’s capability to offer similar solutions is simply one of the multiple benefits of the technology for administrators of networks of many different types and sizes.

Top Six Fear-Driven Network Equipment Purchases


Fear is one of our most primal survival instincts.  But, as such, sales people around the world have made a business out of selling their products on fear and making  them out to be a necessity for survival. Below, we will highlight some of the current and historical fear-based triggers used to push oftentimes unneeded items with respect to the networking industry.

1) CALEA compliance — A little over a year ago, we were besieged by frantic inquiries from many of our ISP customers about the need to do something for the new CALEA laws.  Basically, these are laws that require data carriers to provide access to law enforcement agencies upon receipt of a judge’s order.

We spent the next few months researching what the intent of the CALEA laws were, and what that meant to our customers.   Yes, CALEA is a real law with teeth, but it was intended to help law enforcement agencies track criminals using data networks, not force ISPs into bankruptcy.

There are some low cost options available to operators wanting to conform, so before you break the bank, do some research.  But, also be aware, as somewhere along the line CALEA became the Next Y2k fear-driven windfall for unscrupulous networking sales reps. Familiarize yourself with what you need and then find a product that works for you. While we were more than happy to help users of our products comply, we felt than an informed customer was more important that one that was simply panicked and afraid.  More info on the NetEqualizer approach to CALEA compliance.

2) Secure credit card transmission over the Internet — In short, credit information becomes the most unsecured  once it reaches  a corporate database. A hacker or employee with bad intentions is many times more likely to lift credit card information from a fixed database rather than in transit over the Internet. Therefore, the paranoia that abounds over submitting a credit card to Web a site for fear of transmission piracy is way out of proportion to the actual risk.

Consumers will gladly hand their credit card off to a random strangers behind the cash register at a brick and mortar establishment, but for some reason, submitting your credit card to a Web site creates an unacceptable risk for many. This fear has given rise to a cottage industry around secure Internet transmission. The bottom line is that stealing a credit card in transit over the Internet would take extreme patience and inside help from a carrier. To top it off, the credit card issuers have mastered the art of shutting off your card at the first sign of any anomaly (at great inconvenience to their customers in many cases, but worth it in a true emergency).  However despite the relative lack of risk, there is a significant amount of money and technology spent on securing merchant sites.

Related article “Do we really need SSL

3) Y2k — This is an old one, and yes, there were some critical systems out there that might have suffered. My firsthand personal experience from that  time was just a wake-up call. My employer had me doing Y2k upgrades to our product line and the scare pushed our sales to their biggest year ever.  However, within 3 years revenue had dropped 65 percent. Perhaps we should have been doing real product improvements?

4) Virus protection for your laptop — Yes, viruses are real and they attack all the time, but I simply just save off my critical files daily and re-load my windows box when I get a virus.  I prefer this method over being a slave to a Norton pop-up  box.  You can also convert to MAC or Linux desktop, which seem to carry some form of natural immunity. New York Times writer Paul Boutin agrees in this recent article.

5)  Lack of technology for our schools — Yes, there is some level of computer literacy required in the work force today, however, with the billions (trillions?) spent by schools today, you’d think there might be some increase in standardized test scores. I’d much rather see the money spent on increasing teacher salaries and smaller class sizes, even if it meant learning to calculate on an abacus. Training the mind to think and reason critically is a skill for life that transcends technology and requires encouragement and challenge from teachers.

6) Uninterruptable Power Supply (UPS) — I almost gagged when I read the blurb  below from a UPS sales VP from a trade rag. Originally, I was thinking of including UPS power supplies on my list, but I had no evidence that they were being miss represented. And, yes, in many situations a good UPS will save your computer and computer center from crashing, so please understand they are important pieces of equipment for a data center. But, the context below confirmed my suspicion.  The lead touts ways to speed up network performance, essentially implying that if your network is slow, you need UPS servers to correct it!

Are their desktops locking up every time someone runs the microwave oven? “If VARs aren’t selling UPSs [uninterruptible power supplies] with each new server or desktop, they are doing their customers an injustice, and they may be leaving money on the table,” says ….. name and company omitted.

This quote and full  article is written to infer that your desktop computer and network may run “slow” because of a lack of power. The fact is, your computer will crash hard if  power drops below a fixed tolerance. It is not an electric motor that winds down slowly. It is either on or off. A UPS prevents crashes due to lack of power, but it will not make your network faster or more efficient.

The point of this article isn’t to completely discount the six issues discussed above, but rather to provide some context. In many cases, fear is based on a lack of knowledge and understanding. Therefore, the problems mentioned here may not necessarily be best solved with one tech product or another, but instead could be remedied by a little bit of research. As a consumer, doing your homework goes a long way.

NetEqualizer-Lite Is Now Available!


Last month, we introduced our newest release, a Power-over-Ethernet NetEqualizer. Since then, with your help, we’ve titled the new release the NetEqualizer-Lite and are already getting positive feedback from users. Here’s a little background about what led us to release the NetEqualizer-Lite…Over the years, we’d had several customers express interest in placing a NetEqualizer as close as possible to their towers in order to relieve congestion. However, in many cases, this would require both a weatherproof and low-power NetEqualizer unit – two features that were not available up to this point. However, in the midst of a growing demand for this type of technology, we spent the last few months working to meet this need and thus developed the NetEqualizer-Lite.

Here’s what you can expect from the NetEqualizerLite:

  • Power over Ethernet
  • Up to 10 megabits of shaping
  • Up to 200 users
  • Comes complete with all standard NetEqualizer features

And, early feedback on the new release has been positive. Here’s what one user recently posted on DSLReports.com:

We’ve ordered 4 of these and deployed 2 so far. They work exactly like the 1U rackmount NE2000 that we have in our NOC, only the form factor is much smaller (about 6x6x1) and they use POE or a DC power supply. I amp clamped one of the units, and it draws about 7 watts….The Netequalizer has resulted in dramatically improved service to our customers. Most of the time, our customers are seeing their full bandwidth. The only time they don’t see it now is when they’re downloading big files. And, when they don’t see full performance, its only for the brief period that the AP is approaching saturation. The available bandwidth is re-evaulated every 2 seconds, so the throttling periods are often brief. Bottom line to this is that we can deliver significantly more data through the same AP. The customers hitting web pages, checking e-mail, etc. virtually always see full bandwidth, and the hogs don’t impact these customers. Even the hogs see better performance (although that wasn’t one of my priorities). (DSLReports.com)

Pricing for the new model will be $1,200 for existing NetEqualizer users and $1,550 for non-customers purchasing their first unit. However, the price for subsequent units will be $1,200 for users and nonusers alike.

For more information about the new release, contact us at admin@apconnections.net or 1-800-918-2763.

An Easy Way to Block/Interfere with Skype?


Art Reisman CTO www.netequalizer.com By Art Reisman

I got a call from a customer the other day who claimed that their NetEqualizer was working great except that it was interfering with their Skype calls, and he wanted us to make it stop.

Upon further investigation, we determined the NetEqualizer was  not interfering with his Skype calls at all. And then it hit me…His upstream ISP must be interrupting them. I can’t be sure of this, but there really was no other explanation. His access was good and we checked a couple of Skype calls and their bandwidth load was well below the threshold of anything the NetEqualizer would touch by design.

Then I had another “Aha!” moment while looking at their Skype streams on our built-in sniffer. The calls seemed to stay fairly steady in a tight range around 16kbs. It would be very easy and low cost to target streams in this range and periodically drop some packets, enough to make the call sound horrific while leaving any non-streaming media in that bandwidth range alone. I have no intention of tweaking our NetEqualizer to fill this mission,  however I did some quick research on the subject and did not come up with anything to make me think it would not work. If you are a Skype geek feel free to comment.

To add some context, here’s a link to an article I wrote a while back on the subject of blocking Skype: Blocking Skype Won’t Be Easy.